istoleacamaro
07-01-2007, 10:54 PM
Ok its a 2002 yamaha blaster with a brand new rebuilt motor, bored over to like a 220 or so i was told. (stock is 189ish) The quad is a strong runner and rides very smooth. The quad has a pretty new motor (so i was told but has tons of power and compression). I bought a 1996 Yamaha blaster with this rebuilt motor in it and it had frame damage so i bought a 2002 blaster rolling chassis and put this motor in it. When i got the motor i put a brand new clutch in it. Starts within a few kicks and runs fine.
Mods/List
-bar risers
-key delete
-light delete
-oil injector delete
-maer lime green race plastics (were on the roller dont ask)
-4 aluminum douglas rims (so light!)
-2 rear kenda klaw tires (very new)
-front and rear sand tires on douglas rims
-i believe 2 more sets of rims (1 set stock and 1 set douglas aluminum)
-full DG exhaust
-box of parts (cylinders, crank, pistons, gears, cases, etc)
-newer cables
-low hour shocks
-motor bored out to around 220ccs
-pretty sure it had a new reed cage i think its boysen
-K&N air filter and assembly (just cleaned)
-aftermarket rear grab bar (easier to stand on:)
possibly more idk
Bad
-leaks gas? float problem i think if it sits for a day it leaks a little gas on the floor but it runs fine the whole time its running i just dont think the float is sealing
-kickstarter sometimes doesnt want to catch, but always does after a few attempts at moving it around
-a lot of the frame is just paint and doesnt look the best
-frame cracked right where the grab bar bolts on (big wheelie went too big :( )
-left foot peg stripped out new owner could either weld it (i could get it welded, or just retap it)
the parts quad is an almost complete roller has electrical stuff, full plastics, wheels, all frame parts, exhaust, pretty much a roller it was ready to run before i pulled the motor out of it. the roller has a slightly bent frame but is still solid
http://www.putfile.com/pic.php?img=3146145
the roller is behind the green bike, this pic was when it was completed so everything is still the same just the new damage and of course paint chipping... putfile.com/zhaef has more pics of it in action and the damage. price is negotiable looking for 1500ish? possibly less or a trade. i am looking for a running 4 cylinder 5 speed s-10 or something similar... just make an offer
Mods/List
-bar risers
-key delete
-light delete
-oil injector delete
-maer lime green race plastics (were on the roller dont ask)
-4 aluminum douglas rims (so light!)
-2 rear kenda klaw tires (very new)
-front and rear sand tires on douglas rims
-i believe 2 more sets of rims (1 set stock and 1 set douglas aluminum)
-full DG exhaust
-box of parts (cylinders, crank, pistons, gears, cases, etc)
-newer cables
-low hour shocks
-motor bored out to around 220ccs
-pretty sure it had a new reed cage i think its boysen
-K&N air filter and assembly (just cleaned)
-aftermarket rear grab bar (easier to stand on:)
possibly more idk
Bad
-leaks gas? float problem i think if it sits for a day it leaks a little gas on the floor but it runs fine the whole time its running i just dont think the float is sealing
-kickstarter sometimes doesnt want to catch, but always does after a few attempts at moving it around
-a lot of the frame is just paint and doesnt look the best
-frame cracked right where the grab bar bolts on (big wheelie went too big :( )
-left foot peg stripped out new owner could either weld it (i could get it welded, or just retap it)
the parts quad is an almost complete roller has electrical stuff, full plastics, wheels, all frame parts, exhaust, pretty much a roller it was ready to run before i pulled the motor out of it. the roller has a slightly bent frame but is still solid
http://www.putfile.com/pic.php?img=3146145
the roller is behind the green bike, this pic was when it was completed so everything is still the same just the new damage and of course paint chipping... putfile.com/zhaef has more pics of it in action and the damage. price is negotiable looking for 1500ish? possibly less or a trade. i am looking for a running 4 cylinder 5 speed s-10 or something similar... just make an offer